Company that trust their customers


Best Quality Best Price Best Service it is a V.F.Korea


Product Details ▼

Specifications of the equipment may be changed upon previous agreements. The price may be adjusted accordingly.

Forming Area

Width 500~1000㎜ × Length 600~1,200㎜

Forming Method

1) Upper and Lower forming table are driven by four toggle links and a servomotor Chain Width Adjustment
2) Two types of Forming Method :
A - Upper Vacuum
B - Lower Vacuum

Product Depth

Maximum 120㎜

Used Material Types
Thermoplastic resin material in rolls such as PS, PP, PVC, HIPS, ABS, and etc.
Thickness 0.2~1.5㎜, Material Width 600~1,070㎜
Forming Ability

1,000 shot/hour, 3.6 sec/cycle Max.
(general products, HIPS 0.3 mm)

Material Transfer
The servomotor operation allows precise transferred distance and speed settings for materials.
The material distance and speed by using a touch monitor.
Material Width Adjustment

Separate adjustment for front/back using an electric motor and rotor in an encoder combination.

Heating method
“Double-sided heating method", composed of upper and lower heater box
(External emit when machine stop or an emergency)
Heater specification
Infrared ceramic heater (electric power 400W, size 122mm x 122mm)
Heater Box
Width 1,080mm x Length 2,700mm (for both Upper and Lower)
Temperature control
SSR (Solid state relay) using P.I.D. automatic temperature compensation and “ON, OFF” temperature control method on touch monitor Can save temperature data for each forming product.
Control point
Upper heater 73 point, Lower heater 37 point (Upper and Lower Total : 110 points)

Control panel
AC servo controller, a PLC automatic continuation program control system Control for “switch, timer, speed, and etc” using touch monitor and storage function of setting profiles (up to 250 profiles).
Automatic operation mode
Controls the timer of each operation unit
Switch mode
“Manual switch", “Automatic switch”
speed setting mode
Material feed distance and speed, table speed, plug assist speed and working distance setting
Heater temperature
control screen
Automatic temperature adjustment screen
Control point
Displays each operation unit’s error messages in the event of a malfunction

Table operation system
The servomotor operates only when the forming table is in action; this allows reduction of electricity by 40% and considerable amount of noise when compared to the conventional hydraulic type Precision of table stationery position and moved distance within 3/100 error of margin.
Ball screw and servomotor drive.
Upper and Lower forming table are each supported by Ø125 x 2EA auxiliary pneumatic cylinders.
Table position and speed touch monitor control adjustment type.

Mold Specification
Upper Mold
Width 500~1,000㎜ × Length 600~1,200㎜ × Height 140~200㎜
Lower Mold
Width 500~1,000㎜ × Length 600~1,200㎜ × Height 150~200㎜

Vacuum system
Vacuum pump
Oil circulation vane type (60㎐ : 7.5㎾ 6,000Liter/min)
Vacuum tank
400 Liter vacuum tank

Air Pressure System
Pressurized Air
Compressor 15HP, working pressure 5~7kg/㎠, Dry pressurized air (Compressor and dryer system available separately)

Material spread
Material loading by pneumatic cylinder
Material size
Maximum Width 1,050㎜ × Maximum radius 1,000㎜
Material weight
Up to 600 kg

Cooled parts
Mold, material transfer chain, rear shutter
Cooling specifications
Clear water under 30°C, requires 10RT frozen chiller (available separately)

Power consumption
(Forming machine)
Description of part Maker Capacity Remark
Heater HANATECH(Korea) 128.0 ㎾ Upper 64.0 ㎾ x Lower 64.0 ㎾
Forming table drive motor MITSUBISHI(Japan) 14.0 ㎾ Upper 7.0 ㎾ x Lower 7.0 ㎾
Material convey motor MITSUBISHI(Japan) 5.0 ㎾
Material width adjustment SPG(Korea) 0.8 ㎾ Front 0.4 ㎾ x Rear 0.4 ㎾
Material spread motor SPG(Korea) 0.4 ㎾
Cooling fan HYESUNG(Korea) 0.8 ㎾ 0.4 ㎾ x 2 ea
vacuum pump Rietschle(Germany) 7.5 ㎾ 50㎐ 5.5㎾, 60㎐ 7.5㎾
Total 156.5 ㎾ 220/380
Volts, 3Phase, 50/60㎐

(separate purchases)
Description of part Capacity Remark
Air compressor 11.2 ㎾ 15 HP
Coolant chiller 10.0 ㎾ 10 RT (Cooling tower 30RT)
Total 21.2 ㎾ 220/380 Volts, 3 Phase, 60 ㎐

Machine Size
  • Width 1,800㎜ × Length 6,000㎜(7,980㎜ including material spreader) × Height 2,530㎜

Machine Weight
  • Approximately 7.0 ton